Working on high-voltage batteries in electric vehicles and plug-in hybrids requires special employee qualifications and safe, certified equipment.
With the VAS 275 003, the user always has the right tool for this work at hand.
The 123-piece high-voltage tool set VAS 275 003 was designed exclusively in coordination with all Group brands and enables all relevant activities in the high-voltage area to be carried out.
The VAS 275 003 is optimally adapted to the area of ??application. We deliberately avoided using tools that were not needed for vehicle repairs.
The tool set consists of the modules VAS 275 003/1, VAS 275 003/2, VAS 275 003/3,
VAS 275 003/4 and VAS 275 003/5.
The variable foam inserts of the individual modules are suitable for the workshop trolleys VAS 6834A, VAS 6835A, VAS 276 001 and VAS 276 003. The division into half or full drawer sizes depends on the respective module scope. Each foam insert can be adapted to the respective drawer size using appropriate perforation.
The high-voltage tool set offers a stationary alternative to the portable tool sets with insulated tools (VAS 6762A, VAS 691 003A, VAS 6883A, VAS 691 001). The insulating mat VAS 6762/44 and the voltage tester VAS 6762/45 must be ordered separately when using VAS 275 003.
The VAS 275 003 meets the requirements of DIN EN IEC 60900, which means that each tool is individually tested and approved for 1,500 V DC.

The VAS 275 003 consists of the following modules:

VAS 275 003/1, module 1, bit assortment, ASE 275 004 00 A00
Contents:
Isolated bits:
1x slot each (blade width): 2.5; 3.5; 5.5mm
1x Phillips each: PH0, PH1, PH2
1x Pozidriv each: PZ0, PZ1, PZ2
1x Torx® each: T10, T15, T20, T25
1x hexagon socket each: 3, 4, 5, 6mm

Actuation adapter:
1x screwdriver handle, regular size
1x screwdriver handle, narrow
1x screwdriver handle, short
1x screwdriver handle, lockable
1x adapter hexagon ¼” bit (outside) to ¼” square (outside)
1x bit extension adapter

VAS 275 003/2, Module 2, torque tools, ASE 275 004 00 B00
Contents:
1x torque screwdriver 0.5-2 Nm, insulated
1x torque screwdriver 2-7 Nm, insulated
1x torque wrench 5-14 Nm, insulated, T-handle
1x torque wrench 5-25 Nm, insulated, with 3/8" square drive

Interchangeable blades for the torque wrench 5-14 Nm with T-handle:
1x hexagon each (outside): 3, 4, 5, 6, 7, 8, 9, 10, 13, 17mm
1x Torx® each: T15, T20, T25, T27, T30 and T40
1x adapter ¼" hexagon (bit) to ¼" square for holding ¼" insert tools in short
1x adapter ¼” hexagon (bit) to ¼” square for holding ¼” long insert tools

VAS 275 003/3, Module 3, pliers, ASE 275 004 00 C00
Contents:
1x needle nose pliers 160mm with straight cutting edge
1x needle nose pliers 200mm with straight cutting edge
1x needle nose pliers 160mm with curved cutting edge (approx. 40°)
1x needle nose pliers 200mm with curved cutting edge (approx. 40°)
1x Langbeck flat-nose pliers 160mm
1x side cutter 140mm
1x cable cutter 210mm with opening spring

VAS 275 003/4, Module 4, ratchets and sockets, ASE 275 004 00 D00
Contents:
Ratchets:
1x ratchet wrench ¼” fine tooth
1x ratchet wrench 3/8" fine tooth
1x extension 125mm 3/8“
1x extension 250mm in 3/8“
1x extension 75mm in ¼“ 1x extension 150mm in ¼“

Plug-in inserts ¼“:
1x external hexagon each: Wrench size in mm: 4; 5; 5.5; 6; 7; 8th; 9; 10; 11; 12; 13
1x hexagon socket each: Wrench size in mm: 3, 4, 5, 6, 8
1x Torx® each (short): T10, T15, T20, T25, T27, T30

Plug-in inserts 3/8“:
1x normal external hexagon each: SW in mm: 8, 10, 11, 12, 13, 14, 16, 17, 18, 19, 21, 22
1x hexagon socket each, long (approx. 157mm): SW in mm: 4, 5, 6, 8, 10
1x Torx® each (short): T10, T15, T20, T25, T27, T30, T40, T50
1x each XZN (multi-tooth, short): M8, M10, M12
1x external Torx® each (short): E10, E12

VAS 275 003/5, module 5, screwdriver, ASE 275 004 00 E00
Contents:
1x slot each: 3.5 x 100mm, 4.5 x 125mm, 5.5 x 125mm
1x Phillips each: PH1 x 80mm, PH2 x 100mm
1x Pozidriv each: PZ1 x 80mm, PZ2 x 100mm
1x Torx® each: T10H x 100mm, T15H x 100mm, T20H x 100mm, T25H x 125mm,
D27H x 125mm, D30H x 125mm

Service parts:
ASE 275 004 00 A00 High-voltage tool kit module 1 VAS 275 003/1    
ASE 275 004 00 B00 High-voltage tool kit module 2 VAS 275 003/2    
ASE 275 004 00 C00 High-voltage tool kit module 3 VAS 275 003/3    
ASE 275 004 00 D00 High-voltage tool kit module 4 VAS 275 003/4    
ASE 275 004 00 E00 High-voltage tool kit module 5 VAS 275 003/5