- For replacing defective PDC holders on bumpers.
- For retroactive punching of PDC sensor holes.
The repair process is described in the workshop manual.

The items supplied with the assembly tool for PDC holder VAS 6614A comprise:
VAS 6614 plus supplementary retrofit kit VAS 6614A/1 (1 centring pin ø17.8mm, 4 securing aids).

The items supplied with the assembly tool for PDC holder VAS 6614B comprise:
VAS 6614A plus supplementary 4 securing aids VAS 6614/7

The items supplied with the assembly tool for PDC holder VAS 6614C comprise:
VAS 6614B plus supplementary 4 securing aids VAS 6614/8 and screw hole punch ø18.4mm VAS 6614/9.

Note:
VAS6614B can be modified to VAS6614C with retrofit kit VAS6614C/1.
The supplements are for the various model-specific diameters of PDC sensor.

Items supplied:
1 screw hole punch ø 18.2mm
1 screw hole punch ø 18.4mm
1 screw hole punch ø 26mm
2 centring pins
1 panel drill bit, cylindrical shaft
1 drift, red
4 attachment aids, grey
4 attachment aids, blue
4 attachment aids, green

Replacement parts:

Screw hole punch ø 18.2mm
VAS 6614/1; ASE 412 177 00 000

Screw hole punch ø 26mm
VAS 6614/2; ASE 412 178 00 000

1 centering drift ø 18.2mm
VAS 6614/3; ASE 412 179 00 000

1 drill bit
VAS 6614/4; ASE 412 180 00 000

1 centering drift ø 17.8mm
VAS 6614/5; ASE 412 181 00 000

4 attachment aids for PDC holder
VAS 6614/6; ASE 412 182 00 000

4 attachment aids
VAS 6614/7; ASE 412 184 00 000

4 attachment aids
VAS 6614/8; ASE 412 185 00 000

Screw hole punch ø 18.4mm
VAS 6614/9; ASE 412 186 00 000

Warranty
24 months

Manufacturer
Kleinbongartz & Kaiser