Important Note:
VAS6356 is an minimum required tool that is a component of VAS6160A/TSP !
Replacement component for VAS6160A/TSP.
The test instrument box VAS 6356 is used in conjunction with diagnosis testers VAS 5052A,VAS 6150 and VAS6150A/B/C , VAS6160A to perform all current test instrument tasks in the course of guided fault finding.
Test instrument box VAS 6356 is comparable with the test instrument technology from diagnosis tester VAS 5051B and also the test instrumentation included with it.
Design and features:
Future-proof test instrument technology for measuring quick signal patterns (e.g. CAN bus).
Simultaneous use of 2 rapid DSO channels and a highly accurate, high resolution multimeter (current, voltage, resistance, continuity and diodes).
8-channel data logger for simultaneous display of all input signals.
Galvanic isolation of voltage supply, multimeter and DSO channels allow "high" measurements at various sources (no earth tap required).
Prepared for hybrid drives. Instead of multimeter, for example, an optimal module can be connected for measurement of insulator resistance.
Prepared for measuring microvolts (optional) via special sensor head
High storage volume facilitates secure and targeted diagnosis by adequate recording of signals before and after fault event.
Complex trigger links across all input channels for diagnosis of complex processes.
Automatic setting of all parameters through sensor selection makes operation easy.
Specification graph curve library for specified/actual comparison.
Technical data:
USB 2.0
Housing: Sheet metal-plastic housing, drop height 90cm, protection category IP54
Housing dimensions: 290x200x70mm
Weight: approx. 2kg
Temperature range: Storage -20 to +55°C, operation 0 to +40°C
Permits: CE, UL
Items supplied:
Test instrument box, single
VAS 6356/1 ASE 405 301 00 000
Multimeter lines
VAS 6356/2 ASE 405 302 00 000
Feeler head
VAS 6356/3 ASE 405 303 00 000
Current clamp 100A
VAS 6356/4 ASE 405 304 00 000
KV clamp
VAS 6356/5 ASE 405 305 00 000
Trigger clamp
VAS 6356/6 ASE 405 306 00 000
USB cable
VAS 6356/7 ASE 405 307 00 000
Table mains unit without mains cable
VAS 6356/8 ASE 405 308 00 000
Operating instructions, software CD
VAS 6356/9 ASE 405 309 00 000
Operating instructions, print version
VAS 6356/10 ASE 405 310 00 000
Storage case
VAS 6356/14 ASE 405 314 00 000
Recommended accessories:
Current clamp 1800A
VAS 6356/11 ASE 405 311 00 000
Connection cable, 12V
VAS 6356/16 ASE 405 316 00 000
Equipment trolley
VAS 6556, ASE 465 842 00 000
Calibration:
For first time after 2 years then annually
Warranty:
24 months
Manufacturer:
AVL DiTEST GmbH, Fürth
US English -ASE40530000023
For AVL Technical Support call:
USA: 1-833-984-3843
Canada: 1-833-945-2880