The hybrid test module serves to measure the high voltage insulation resistance and de-energisation on hybrid vehicles.
The hybrid test module can be used independently. However, for reasons of safety, it can only be used in conjunction with "Guided fault finding" (from basic CD 18/ODIS).
To adapt the hybrid test module VAS 6558, hybrid test adapter set VAS 6558/1 is required in addition

Design and features

Test cable with insulated test probes.
Fuse protection against excess current, overload and short circuit for highest possible personal protection.
Input and output are separated galvanically (via USB interface).

Technical data

Test voltage of 500 volt to 1000 volt (can be adjusted via software, in increments).
Direct measurement of insulation resistance (via base spot resistance),
and also in line with SAE J 1766 standard via selectable resistance.
The power is supplied via the USB interface. Output is restricted to approx. 1.5 watt.
Calculation of insulation resistance and display in ohms/volts and also as overall resistance.
Measuring ranges:
± 750 volts, resolution 0.5 volt, ± 1.5% v.M. + 5 digits
± 100 volts, resolution 0.1 volt, ± 1.0% v.M. + 5 digits
± 20 volts, resolution 0.01 volts, ± 0.5% v.M. + 5 digits.

Recommended accessories

Hybrid test adapter set
VAS 6558/1; ASE 405 351 00 000

Warranty

24 months

Manufacturer

AVL Ditest GmbH

ASE 405 350 00 000