1-800-892-9650 SEARCH
Item Detail

Table of Content Shop Equipment Lifting/Hoists Above-Ground Post Lifts

Image shown may not
be actual product.
Product and price information are
subject to change without notice.
10,000 lb. Asymmetric Lift with 2' Extension
$8,364.18 *

* log in for dealer pricing.
Direct from 3rd Party Supplier
Add To Cart


Asymmetric two-post lift. For decades, Rotary® has been the recognized leader in vehicle service lifts. This legendary reputation has set the standard for quality, durability, reliability and attention to safety throughout the automotive service market. With Rotary lifts, you have the service and support you need. Our world-wide network of service companies are always standing by.

Most of our lifts are third party tested by ETL and certifi ed by ALI to meet or exceed strict ANSI standards such as cable cut and deformation tests. Be sure the lift you buy has the gold ALI/ETL label that assures your lift has been tested to meet these standards.


  • Conventional controls located on power unit
  • Two stage arms with three position flip-up adapters
  • Asymmetrical two-stage arms are the standard configuration designed to accommodate a wide range of typical vehicles with three-position adapters
  • True asymmetrical rotated column design
  • Performance tested to 20,000 lift cycles
  • ALI Gold Certified


ROTN595 EH1 Conversion Kit for 10K EH2 Lifts


One year for parts and labor.  Additional one-year parts warranty if installed by a Rotary-Authorized Installer (RAI) 

Product Specification

Rise 72 3/4" (1848 mm) - 78 1/4" (1987 mm)
Low step height 7" (178 mm)
Lifting Capacity 10,000lbs. (4536 kg)
Ceiling height required (Standard) 12' (3658 mm)
Reach (rear arm minimum) 40 1/4" (1019 mm)
High Step Height 10 1/4" (260 mm)
Width overall** (outside of base plate) 11' 5-3/8" (3489 mm)
Floor to Overhead Switch 11' 2 3/4" (3423 mm)
Reach (front arm maximum) 40 3/4" (1036 mm)
Minimum Adapter Height 4 3/4" (121 mm)
Motor/Voltage 2 HP / 208v-230v
Height overall (EH2) 13' 8 1/2" (4178 mm)
Drive-through clearance 95 1/4" (2416 mm)
Reach (front arm minimum) 24" (610 mm)
Reach (rear arm maximum) 61" (1548 mm)
Inside Columns 107 1/4" (2727mm)
Cylinder Height at Full Rise 107-1/4" (2727 mm)
Time of Full Rise / Descent 45 / 40 Seconds
Minimum Bay Size 12' x 24' (3658 mm x 7315 mm)

Invisible Button