1-800-892-9650 SEARCH
Item Detail

Table of Content Shop Equipment Lifting/Hoists Above-Ground Post Lifts

Image shown may not
be actual product.
Product and price information are
subject to change without notice.
10,000LB Symmetric Lift w/ Flip Adapters & 2' Extension
Model: ROTSPO10EH2
$8,272.98 *

* log in for dealer pricing.
Direct from 3rd Party Supplier
Add To Cart


For decades, Rotary® has been the recognized leader in vehicle service lifts. This legendary reputation has set the standard for quality, durability, reliability and attention to safety throughout the automotive service market. With Rotary lifts, you have the service and support you need. Our world-wide network of service companies are always standing by.

Most of our lifts are third party tested by ETL and certified by ALI to meet or exceed strict ANSI standards such as cable cut and deformation tests. Be sure the lift you buy has the gold ALI/ETL label that assures your lift has been tested to meet these standards.


  • True symmetric column design
  • “Double S” column design with single piece construction provides a channel for the bearings to travel in, maximizing the strength of the column and surface contact area of the bearing
  • Single point lock release which releases the locks at the same time
  • Two full stroke cylinders, one in each column
  • Arm restraints on each arm engage when the vehicle is lifted
  • Third party certified


ROTN595 EH1 Conversion Kit for 10K EH2 Lifts


One year for parts and labor.  Additional one-year parts warranty if installed by a Rotary-Authorized Installer (RAI) 

Product Specification

Rise 72-5/8" - 78-1/8" (1845 mm - 1984 mm)
Height Overall (EH1) 13' 8-1/2" (4178 mm)
Width Overall 11' 5-1/2" (3493 mm)
Drive-Thru Clearance 102-1/2" (2603 mm)
Floor to Overhead Switch 11' 2-3/4" (3423 mm)
Reach (Front Arm Minimum) 31" (787 mm)
Reach (Front Arm Maximum) 54" (1372 mm)
Reach (Rear Arm Minimum) 31" (787 mm)
Reach (Rear Arm Maximum) 54" (1372 mm)
Minimum Adapter Height 4-5/8" (118 mm)
Low Step Height 7" (178 mm)
High Step Height 10-1/4" (260 mm)
Inside Columns 114-1/2" (2908 mm)
Cylinder Height at Full Rise 11' 10-3/4" (3626 mm)
Lifting Capacity 10,000 lbs. (4536 kg)
Motor / Voltage 2 HP / 208V-230V
Time of Full Rise 45 Seconds
Ceiling Height Required (EH2) 13' 10" (4216 mm)
Max Load Per Arm 2,500 lbs. (1134 kg)
Minimum Bay Size 12' x 24' (3658 x 7315 mm)

Invisible Button